Of High solid water-based adhesive elastic vibration damping paint

The product is a key choice for the environment with strict additional weight requirements, such as steel structure building roofs, airplanes, yachts, vehicles, and trains, etc.

Different from the conventional damping material, F-1000 is a kind of low-density product, which has high damping performance on the premise of low dry film weight. With the vibration absorption, viscosity (energy dissipation) and spring (energy storage) characteristics, the vibration energy is absorbed into the material and converted into the heat.

Model	F1000
Weight	20kg/barrel
Product features	No effluent (thixotropy) Excellent adhesive ability to aluminum and other metals Solidified rigid brittle-resistant surface Flame retardant, nontoxic and environmental-friendly Wide range of operating temperature and frequency Air gun spraying, air-free spraying, spraying and rolling construction High performance, light weight, special formulation of composite water-based damping material, easy application and maximum performance utilization
Product advantages	Has excellent fire resistance and meets the international yacht fire control standard. Water-based and easy to use and clear. Lightest weight and best performance vibration-damping product. Suitable for adverse outdoor places. Increases transmission loss and obviously eliminates the resonant sound. Suitable for application environments with high weight requirements.
Application	Ceilings of steel structures such as airports, stations, wharves, stadiums, etc. Laying of steel structure stairs and metal bottom plates. Engine compartments, ship compartments, decks and ship compartment walls. Active vibration reduction and passive noise reduction of airplanes, trains and vehicle carriages. Chariot, truck chassis and outer cover of excavating machinery. Outer casing of mechanical equipment causing sound pollution.
Surface treatment	F-1000 is a highly adhesive product specially customized for the base materials which are difficult to adhere such as plain lead, so as to provide sufficient basic surface treatment. Clear all dust, dirt, oil, grease, rust, release agent, etc. on the surface. Clean the surface with the wire brush. It is suggested to use grinding sand and abrasive paper to polish the surface. The proper degreasing scheme is adopted to degrease the surface. It is suggested to spray primer on the surface of the iron base plate to prevent thin rust.
Use methods	Before use, the product must be completely mixed up. If the agitator is used, the product must be mixed until it is smooth, pure white and consistent. If necessary, the product can be added with 0.3% water to change viscosity. The construction temperature is over 15° C, and the metal temperature is more than 10°C. Under cold conditioning, the base plate can keep dry and warm. Forced ventilation is conducive to coating drying, and air should move in or out in the drying process.
Construction methods	Spraying; Brushing; Roller; Short rag rolling wheel

*All parameters are subjected to our final confirmation before order.